Tile adhesives and supplies for tiling

IDEAL FOR:

  • Unpolished Natural Stone And Agglomerates

  • Tufo

COVERAGE:

With one litre:

  • 10/20 m2

 

PLEASE NOTE:

do not apply the product externally if rain is forecast during the following 24 hours. Do not walk on floor while it's drying: wait 24 hours after last product application. In the areas most exposed to weather conditions we recommend applying the product again every two years. Do not apply on terracotta floors or polished/very smooth surfaces. If product has been wrongly applied or if a thorough cleaning is required, remove FILAWET using FILANOPAINT STAR. The product cannot be applied to supports with problems connected with rising damp.

FILAWET

SOLVENT-BASED WET-LOOK CONSOLIDATING PROTECTOR


WHAT IT’S FOR:

  • Gives wet look to untreated surfaces (tumble finishes, flame finishes, natural sawn finishes).

  • Protects material from water and oil.

  • Consolidating effect treatment.


ADVANTAGES:

  • PROVIDES A WET EFFECT THAT CAN BE INTENSIFIED WITH SEVERAL APPLICATIONS.

  • DOES NOT YELLOW WITH AGEING OR WITH ANY ENVIRONMENTAL CONDITION.

  • DOES NOT SCRAPE FROM SURFACE.

Tile adhesives and supplies for tiling

SUBSTRATE PREPERATION

WATERPROOFING

GROUTS & SEALANTS

ANTI-FRACTURE/ WATERPROOFING

Tile adhesives and supplies for tiling

ADHESIVES / BONDING

Tile adhesives and supplies for tiling
This site was designed with the
.com
website builder. Create your website today.
Start Now