Need a Product Calculation?
High-performance, ultra-quick setting self-leveling mortar used in layers 1 to 10 mm thick. 1.5kg/m2 per mm of thickness
Indicated for applications on heated screeds.
Thickness up to 20 mm when charged with aggregates.
Indicated under the action of wheeled chairs or furniture according to EN 12529, thickness over 1 mm.
It can be pumped.
High hardness and resistance.
Low surface porosity.
Easy to polish.
Hardening by hydration.
High capacity for leveling irregular surfaces.
It develops low tensions.
8 months in a dry place
FIELDS OF USE
PLAN-10 N is designed to fill and level the substrate before the laying of indoor ceramic, textile, flexible or wooden floors in residential and non-industrial applications.
-- Suitable substrates: concrete, cement-based screeds, rapid cement-based screeds, screeds based on calcium sulphate, ceramic tiles, natural stone, magnesite screeds, wood, OSB or mechanically fixed chipboard.
-- The substrate must have a sufficient mechanical resistance, good dimension stability and be permanently dry.
-- The substrate must be free of elements reducing adhesion such as dust, dirt, oils, greases, waterproof coats and detached parts.
-- Separation layers, synthetic layers or old leveling products must be removed mechanically, such as by polishing or shot-peening.
-- The layers of water-soluble adhesives must be removed mechanically. The remaining adhesive parts must be treated with PRIMER-101
- Old water-resistant adhesives must be removed mechanically.
- Surface treatments or crumbling parts must be removed completely.
- It is recommended to use the monocomponent primers listed in the table to get a surface without pores with high adhesion. See the relevant Product Data Sheets.
-- Do not apply on substrates with rising damp. A vapor barrier in compliance with the national regulations and norms must be applied in case of rising damp.