Elasticizing and bond-facilitating synthetic rubber latex for adhesives and cementitious mortars.
High bonding performances
12 months in a dry place, sheltered from freezing and high temperatures
FIELDS OF USE
Pour TECHNOS+ or TECHNOLA or TECHNO-XL or TECHNORAP powder into the latex. The mixture must be stirred until a creamy paste has formed. This mixture is recommended for fixing stable natural stone that is not affected by the damp, or ceramic tiles in the following cases:
- medium and large formats on façades or places exposed to considerable temperature variations
- on old tiles outdoors
- on heating floors
- on RASOLASTIK and RASOGUM
- on refined porcelain stoneware outdoors
Need a Product Calculation?
Adhesive for vitreous mosaic on net backing, installed in swimming pools.
Dilute TC-LASTIC with water in 1:1 ratio. Blend TECHNOMOS into the obtained mixture. The resulting product provides an extremely tenacious bond and is highly flexible while maintaining the creamy consistency obtained when only water is used for mixing.
Flexible leveling coat
Blend RASO with TC-LASTIC by pouring the powder into the latex. The mixture must be stirred until until the paste is creamy and lump-free. Recommended for use on surfaces exposed to considerable temperature variations, or on cracked concrete.
In this latter case, it is advisable to bury fiberglass net into the first layer. As compared to leveling pastes mixed with water, this product possesses high bonding powers even on difficult substrates, and is also highly elastic.
The surface must be leveled with two coats, the second applied 24 hours after the first and in layers up to 3 mm thick.
Finish the surface with a sponge trowel or flat trowel.
Products mixed with TC-LASTIC can be applied straight onto:
Cement-based plaster, cement-lime mortar, cement-based screeds, concrete, old ceramic floors.